ECCPP Wheel Spacers 1 inch (25mm) for Blazer, Camaro, Corvette, S10

The brand ECCPP offers a range of Wheel Spacers/Adapters. To ensure a proper and safe installation, it is essential to carefully verify the fitment of these products. The following guidelines should be considered:

NON-INFRINGEMENT DISCLAIMER FOR AUTO PARTS SALES: It is important to note that the use of these wheel spacers/adapters is subject to compliance with applicable laws and regulations. Users are responsible for ensuring that the installation and use of these products does not infringe on any intellectual property rights or violate any other relevant regulations.

PRODUCT DESCRIPTION FITMENTS: The ECCPP Wheel Spacers/Adapters are compatible with the following vehicle models: - 2004-2009 Cadillac XLR - 1987-2005 Chevrolet Blazer - 1982-2002 Chevrolet Camaro - 1984-2019 Chevrolet Corvette - 1995-2002 GMC Jimmy - 1982-2002 Pontiac Firebird

FITMENT REQUIREMENTS: If your factory thread size is different from the wheel spacers, you will need to purchase a set of open-end lug nuts with the correct thread pitch to complete the installation. Your factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) Ensure the wheels have open slots (cavities) between the mounting holes 3) Purchase and replace the factory studs with a set of shorter studs

INSTALLATION CONSIDERATIONS: 1) Check the hub bore size 2) Verify the bolt pattern 3) Determine the correct thread pitch 4) Confirm the required thickness

WHEEL SPACERS 5x4.75 to 5x4.75 FITMENT: These wheel spacers are designed to fit vehicles with a 5x4.75 bolt pattern. They are 1 inch thick and feature a 5x4.75 wheel bolt pattern, 12x1.5 wheel studs, and an 87.1mm center bore. The package includes open-ended lug nuts to install the wheels on the spacers (additional lugs may be required to install onto the vehicle).

WHEEL SPACERS 5x4.75 to 5x4.75 ADVANTAGES: The 1-inch wheel spacers from ECCPP can provide a more aggressive stance, improve vehicle stability, and prevent wheel/tire rubbing issues.

WHEEL SPACERS 5x4.75 SAFETY: The wheel spacers are crafted from high-quality T-6 billet aluminum, ensuring a robust and durable construction. The studs are grade 10.9, heat-treated, and hardened for enhanced safety.

ESSENTIAL FITMENT VERIFICATION: Even if a vehicle is listed as compatible, buyers should still verify the following: 1) Wheel studs have 12x1.5mm threads 2) There is at least 1 inch of clearance between the fender and the wheel/tire 3) Factory wheel studs are shorter than 1 inch (if longer, they may need to be ground or trimmed) 4) Wheel center bore is no smaller than 87.1mm It is also recommended to adhere to the advised torque specification of 70-80 ft/lbs.

product information: